FIELDMARSHAL FMA910 (10 HP), AIR-COOLED HIGH-SPEED DIESEL ENGINE
FIELDMARSHAL FMA910, 10HP, 1500 RPM
GERMEN DESIGN AIR COOLED DIESEL ENGINE
- Effective cooling for continuous long running
- Sturdy Crank Case
- Less vibration
- Fuel efficient
- Long life
- Low Maintenance
Application
- Thresher
- Sugar cane crusher
- Ice Huller
- Irrigation
- Chaff cutter
- Flour Mill
- Sprinklers
- Concrete Mixer
- Mini Dumper
- Block making machine
- Construction-Lift
- Power generation
- Air-compressor
- Vertical Diesel Engine is rated on the effective Horse Power at engine crankshaft as a maximum load for continuous running. Each engine is tested as per IS 1001 - 1981 to give a continuous rating.
- COOLING: Engine cooling is efficiently handled by a run-through water supply. A Radiator or a Cooling Tank can also be provided if required.
- LUBRICATION: All internal moving parts are lubricated by a splash system / through lubricating oil pump.
- ROTATION: Standard rotation is clockwise, facing the flywheel, keeping the exhaust on the left-hand side.
- FUEL INJECTION EQUIPMENT: MICO (BOSCH) Fuel Injection Equipment or equivalent.
- GOVERNING: A sensitive centrifugal type Governor. Speed Variation is controlled within the limit to comply with "B1" Class Governing as mentioned in IS 10000 (Part - 7) 1980.
- CYLINDER LINER: The Cylinder Liner is of graded casting and has an sufficient long life.
- AIR CLEANER: Oil Bath Type Air Cleaner is provided to clean the incoming air. The use of clean air increases the life of the Cylinder Liner.
- STANDARD EQUIPMENT: Spanner Set, Screw Driver, Starting Rope / Handle, Air Cleaner, Silencer, Fuel Tank, Tool Bag, Instruction Manual.
- IMPORTANT NOTE: TO GET MORE EFFICIENT ENGINE PERFORMANCE, THE TEMPERATURE OF COOLING WATER COMING OUT FROM THE ENGINE HEAD SHOULD BE IN BETWEEN 50°C TO 70°C. KINDLY OPERATE THE ENGINE AT THIS TEMPERATURE ONLY.
MODEL FMA 910
- BORE (m.m.) - 102mm
- STROKE (m.m.) - 110mm
- No. OF CYLINDER - ONE
- COMPRESSION RATIO - 17:1
- RATED R.P.M. - 1500
- INJECTION METHOD - DIRECT INJECTION
- SPECIFIC FUEL CONSUMPTION (g/kWh) - 250
- POWER (H.P./kW) - 10/7.35
- METHOD OF STARTING - HANDLE
- ENGINE COOLING METHOD - AIR COOLED
- OIL SUMP CAPACITY (Liters) - 3.7
- GRADE OF OIL SAE - 20W-40
