FIELDMARSHAL FMA908 (8 HP), AIR-COOLED HIGH-SPEED DIESEL ENGINE

FIELDMARSHAL FMA 908, 8 HP,  1500 RPM

GERMEN DESIGN AIR COOLED DIESEL ENGINE

  • Effective cooling for continuous long running
  • Sturdy Crank Case
  • Less vibration
  • Fuel efficient
  • Long life
  • Low Maintenance

Application

  • Thresher
  • Sugar cane crusher
  • ice Huller
  • Irrigation
  • Chaff cutter
  • Flour Mill
  • Sprinklers
  • Concrete Mixer
  • Mini Dumper
  • Block making machine
  • Construction-Lift
  • Power generation
  • Air-compressor

  • Vertical Diesel Engine is rated on the effective Horse Power at engine crankshaft as a maximum load for continuous running. Each engine is tested as per IS 1001 - 1981 to give a continuous rating. 
  • COOLING: Engine cooling is efficiently handled by a run-through water supply. A Radiator or a Cooling Tank can also be provided if required.
  • LUBRICATION: All internal moving parts are lubricated by a splash system / through lubricating oil pump.
  • ROTATION: Standard rotation is clockwise, facing the flywheel, keeping the exhaust on the left-hand side. 
  • FUEL INJECTION EQUIPMENT: MICO (BOSCH) Fuel Injection Equipment or equivalent. 
  • GOVERNING: A sensitive centrifugal type Governor. Speed Variation is controlled within the limit to comply with "B1" Class Governing as mentioned in IS 10000 (Part - 7) 1980.
  • CYLINDER LINER: The Cylinder Liner is of graded casting and has an sufficient long life.
  • AIR CLEANER: Oil Bath Type Air Cleaner is provided to clean the incoming air. The use of clean air increases the life of the Cylinder Liner.
  • STANDARD EQUIPMENT: Spanner Set, Screw Driver, Starting Rope / Handle, Air Cleaner, Silencer, Fuel Tank, Tool Bag, Instruction Manual.
  • IMPORTANT NOTE: TO GET MORE EFFICIENT ENGINE PERFORMANCE, THE TEMPERATURE OF COOLING WATER COMING OUT FROM THE ENGINE HEAD SHOULD BE IN BETWEEN 50°C TO 70°CKINDLY OPERATE THE ENGINE AT THIS TEMPERATURE ONLY.

  •  BORE (m.m.) 95
  •  STROKE (m.m.) 110
  •  No. OF CYLINDER - ONE
  •  COMPRESSION RATIO - 17:1
  •  RATED R.P.M. - 1500
  •  INJECTION METHOD - DIRECT INJECTION
  •  SPECIFIC FUEL CONSUMPTION (g/kWh)  - 250
  •  POWER (H.P./kW) - 8/5.9
  •  METHOD OF STARTING - HANDLE
  •  ENGINE COOLING METHOD -  AIR COOLED
  • OIL SUMP CAPACITY - (Liters) 3.7
  • GRADE OF OIL  - SAE - 20W-40
Add a Review

'