MONO PUMP SETS -FIELDMARSHAL FM805/1 (5 HP, 215ORPM) WITH FM PUMP
MONO PUMP SETS -FIELDMARSHAL FM805/1 (5 HP, 215ORPM) WITH FM PUMP
- PUMP SIZE AVAILABLE - 3X3, 4X4
- MODERN TECHNOLOGY
- STURDY CONSTRUCTION
- LONG LIFE - LOW MAINTANANCE
- FUEL EFFICIENT
- BEST IN ITS CLASS
- HIGH EFFICIENT & POWERFUL
Application
- Irrigation
- Sprinklers
- Canal
- River
- Dam
- Lake
- Wall
- Vertical Diesel Engine is rated on the effective Horse Power at engine crankshaft as a maximum load for continuous running. Each engine is tested as per IS 1001 - 1981 to give a continuous rating.
- COOLING: Engine cooling is efficiently handled by a run-through water supply. A Radiator or a Cooling Tank can also be provided if required.
- LUBRICATION: All internal moving parts are lubricated by a splash system / through lubricating oil pump.
- ROTATION: Standard rotation is clockwise, facing the flywheel, keeping the exhaust on the left-hand side.
- FUEL INJECTION EQUIPMENT: MICO (BOSCH) Fuel Injection Equipment or equivalent.
- GOVERNING: A sensitive centrifugal type Governor. Speed Variation is controlled within the limit to comply with "B1" Class Governing as mentioned in IS 10000 (Part - 7) 1980.
- CYLINDER LINER: The Cylinder Liner is of graded casting and has an sufficient long life.
- AIR CLEANER: Oil Bath Type Air Cleaner is provided to clean the incoming air. The use of clean air increases the life of the Cylinder Liner.
- STANDARD EQUIPMENT: Spanner Set, Screw Driver, Starting Rope / Handle, Air Cleaner, Silencer, Fuel Tank, Tool Bag, Instruction Manual.
- IMPORTANT NOTE: TO GET MORE EFFICIENT ENGINE PERFORMANCE, THE TEMPERATURE OF COOLING WATER COMING OUT FROM THE ENGINE HEAD SHOULD BE IN BETWEEN 50°C TO 70°C. KINDLY OPERATE THE ENGINE AT THIS TEMPERATURE ONLY.
PUMP DATA:
- PUMP SIZE - 3X3, 4X4
- HEAD RANGE - 10 Mtr TO 16 Mtr
- DISCHARGE RANGE - 10 LPS TO 22 LPS
- PUMP TYPE - Oil Seal Type
ENGINE DATA:
- BORE - (M.M.) 80
- STROKE (M.M.) - 62
- DISPLACEMENT (CC) - 311
- No. OF CYLINDER - ONE
- COMPRESSION RATIO - 18:1
- ENGINE R.P.M. - 2150
- INJECTION METHOD - DIRECT INJECTION
- FUEL CONSUMPTION (g/kWh) - 270
- ENGINE POWER H.P. /kW - 5.0/3.7
- METHOD OF STARTING - HANDLE START
- ENGINE COOLING METHOD - WATER COOLED
- OIL SUMP CAPACITY (Liters) - 1.2
- GRADE OF OIL SAE - 20W-40
- ENGINE NET WEIGHT (kg.) - DRY 58.5kg
